Products

Product Code: PM454G

Description
The Permaconn™ solution provides a constant secure link between the supervised premises and the Central Station.

The PM45 4G is a versatile alarm communicator that reports on 4G, 3G and IP to the Central Station.

This communicator can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/3G in the event of a wired Ethernet failure. The communicator reports on 4G or 3G if there is no IP connected.

• Remote “over-the-air” alarm panel programming using 4G/3G or IP path.
• Dual SIM IP alarm communicator.
• Plug & Play solution.
• Interfaces with any Contact ID alarm panel.
• 3 input 3 output, function control using Atlas and/or Pocket Secure.
• Communicator automatically switches between 4G and 3G networks.
• Low current draw, easily powered from alarm panel.
• Small size – Fits inside alarm panel enclosure and suitable for ATM & M2M applications.
• Secure VPN within Optus & Telstra networks – Dedicated for Permaconn events only.
• AES128 encryption for alarm data – Secure transmissions over the public internet.
• High speed RS232 Interface – Future development.
• PM45-4G acquires an IP address automatically using the customers DHCP service – No IT headache.
• Various diagnostic LED’s – Easy installation.
• Activate, commission and diagnose using Atlas – Seamless installation process.
• Three (3) dedicated paths of communication – Uptime in excess of 99.9%.
• Internal watchdog reset function – No unnecessary service call-outs.
• Monitors & reports dialler interface lead status – Panel dialler to Permaconn interface secure.
• Compliant to AS2201.5:2008.
• Outputs can be configured to arm/disarm alarm system, control gates and lights. ‘Pocket Secure’ smartphone app controls these functions.

Specifications:

Housing Material: ABS plastic – Green
Dimensions: 110 (H) x 25 (D) x 80 mm (W)
Weight: 120gm
Operating Environment: 0°- 50°C @15% to 85% humidity (non-condensing)
Antenna: Triple band 3G & Triple band 4G
Modem: Quectel EC21
Power: 8–15V DC. Terminal (must power from appoved supply)
Power Consumption: Standby: 0.08A @13.8V DC, Transmitting: 0.19A @13.8V DC
Communication Protocol: Ethernet (10/100BASE-T)
Network Protocol: DHCP or Static IP
Serial Port: High Speed RS232 interface
Auxiliary Input: 3 x 24Hr input – state change detected every second. EOL 3.3K
Auxiliary Output: 3 x Open Collector output @ 50mA (max) Function control using Atlas web portal and/or ‘Pocket Secure’
Static IP Network Configuration: Ethernet interface using ‘IpSetup’ program Atlas web portal using mobile connection
Data Security: AES Encryption
Supported Modulation: BELL-103, ITU-V21/V22/V22B
Approvals: EN 55022:2006/A1:2007, AS/CA S042.1-2011, AS/CA S042.4-2011 AS/NZS 60950.1-2011, AES2201.5:2008, EN 62311:2008, EN 301489-1 EN 301 489-24, EN 301 908-1, EN60950-1